Troubleshoot Wi-Fi, Bluetooth, or cellular problems
Start by choosing the connection that is not working.
Having trouble with AirDrop? AirDrop uses both Wi-Fi and Bluetooth. See Share files using AirDrop and troubleshoot transfers for instructions and troubleshooting.
| What is happening? | Start here |
|---|---|
| Websites or online apps will not load. | Wi-Fi checks |
| A wireless accessory will not connect or keeps disconnecting. | Bluetooth checks |
| A district-issued cellular device has no mobile service. | Cellular checks |
Wi-Fi: websites or online apps will not load
Try these checks in order:
- Check your network. On campus, connect your district device to ECCRSD_Staff, rather than ECCRSD_Guest.
- Try another website. If another website loads, the problem may be limited to the original website or service.
- Try another browser. Open the website in another browser, if one is available.
- Turn Wi-Fi off, then back on. Reconnect to ECCRSD_Staff and try again.
- On an iPad or phone: Turn Airplane Mode on, then off. Confirm Wi-Fi is on and reconnect to ECCRSD_Staff.
- Save your work, turn the device off, then turn it back on. Try connecting again.
ECCRSD_Staff is asking for a Wi-Fi password? Submit a Staff Technology Request and report the prompt.
Still not working? Submit a request using the guidance at the end of this article.
Bluetooth: an accessory will not connect
Bluetooth connects nearby devices, such as a computer or iPad and a wireless keyboard, mouse, or speaker.
- Check the accessory. Make sure it is turned on and has battery power.
- Move closer. Bring your computer or iPad within a few feet of the accessory, with as few obstructions between them as possible.
- Turn Bluetooth off, then back on:
- Computer: Open System Settings → Bluetooth.
- iPad or phone: Open Settings → Bluetooth.
- On an iPad or phone: You can also turn Airplane Mode on, then off. Check that Bluetooth is on afterward.
- Save your work, turn your computer, iPad, or phone off, then turn it back on. Try connecting again.
How close should you be? Start within a few feet when troubleshooting. Around 30 feet (10 metres) is a common working guideline for many accessories, but range varies by device. Walls, obstacles, and interference can reduce it.
On an iPad or phone, use Settings → Bluetooth to fully switch Bluetooth off and on. The Control Center button may only disconnect accessories.
Cellular: a district-issued device has no mobile service
This section applies only to district-issued devices with cellular service.
- Confirm Airplane Mode is off.
- Turn Airplane Mode on, then off and check whether service returns.
- Turn the device off, then turn it back on.
- As a last troubleshooting step on a district-issued iPhone: Leave Airplane Mode on for 15 minutes, then turn it off and check for service.
- If service still does not return, contact Technology. Include your location, any No Service or SOS message, and whether Wi-Fi works.
While Airplane Mode is on, cellular calls, text messages, and mobile data are unavailable. Plan for that interruption before trying the 15-minute step.
Still need help?
Submit a Staff Technology Request.
If your device cannot get online, use another connected device to submit the request or contact Technology directly.
Include:
- Device: Computer, iPad, or phone, and asset tag if available.
- Location: The room number or area where the issue occurs.
- Connection: Wi-Fi, Bluetooth, or cellular.
- Problem: What will not connect or load, including the website or accessory name.
- Error: The exact message or a screenshot.
- Who is affected: Whether other devices or people have the same issue, if known.
- Steps tried: Which checks you completed and what happened.
Never include passwords or verification codes. Check screenshots for private information before sharing them.